Skip to main content

Smoke, gas and dust extraction systems

9000-400

  1. Suction connection (rear)
  2. Pre-filter mat
  3. Main filter (HEPA part)
  4. Main filter (activated carbon part)
  5. Clean air outlet (rear)
  6. Filter interlock
  7. Filter type plate
  8. Drip tray

Suction system for applications with a maximum suction volume requirement of:

  • 250m³/h - System 9000-400

Three-stage filtration

The devices extract the air pollutants, filter out harmful particles and gases using a three-stage process and return the purified air to the workplace.

Filter stages:

  • Pre-filter fleece
  • HEPA fine dust filter
  • Activated carbon filter

Digital control system

The digital control of the systems adjusts the pump output to the set suction volume depending on the degree of saturation of the particle filters. This means that the pump runs at optimum suction power until the filter is completely saturated.

The minimal space requirement of just 445 mm² makes the device suitable for use in confined spaces.

If large quantities of particles are produced during the process, the installation of an inline filter is also recommended.

Properties

  • Fully automatic control system regulates the maintenance of a constant suction flow through variable motor speed over the entire filter service life
  • Continuous monitoring of clean air by gas and particle sensors
  • Permanent monitoring of the process air by temperature sensor
  • Status display of the current parameters on the graphic display
  • Display of the degree of saturation of the particle filters
  • Display of the degree of saturation of the activated charcoal filter
  • Visual and acoustic signalling of warnings and faults
  • Pre-filter mat for absorbing large particles
  • Combined HEPA/activated carbon filter for absorbing fine dust and neutralising process gases
  • Remote on/off switch
  • Error signal when a fault occurs
  • Adjustable lead and run-on time
  • Optional volumetric flow or vacuum control

Do you have any questions?

Please feel free to contact us. We are always available for you.

+49(0) 5691-6287-0