Fume- Gas- and Dust- Extraction Systems

Interfacing Cables

The systems provide interfaces for correspondence with connected machines or laser controls.

The options include: Remote on-off and alarm for failures of the extraction function.

4 way Mini Bulgin Code: 105.097
ALARM PINS 1 + 2 = VOLT FREE ALARM OUTPUT CONTACTS	REMOTE START VOLT FREE CONTACTS REQUIRED TO OPERATE PIN 3 = REMOTE START INPUT SIGNAL PIN 4 = +12V DC

6 way Bulgin Code: 105.103
ALARM PINS 1 + 4 = VOLT FREE ALARM OUTPUT CONTACTS	REMOTE START VOLT FREE CONTACTS REQUIRED TO OPERATE PIN 3 = REMOTE START INPUT SIGNAL PIN 5 = +12V DC PIN 2 + 6 = NOT USED

5 way XLR Neutric Code: 105.105
ALARM PINS 1 + 4 = VOLT FREE ALARM OUTPUT CONTACTS	REMOTE START VOLTAGE SIGNAL REQUIRED TO OPERATE PIN 2+3 (LINKED) = REMOTE START INPUT SIGNAL PIN 5 = 0V DC

6 way Lumberg Code: 105.096
ALARM PINS 1 + 6 = VOLT FREE ALARM OUTPUT CONTACTS PINS 3 + 4 = VOLT FREE ALARM OUTPUT CONTACTS	REMOTE START VOLTAGE SIGNAL REQUIRED TO OPERATE PIN 5 = +12VDC/+24VDC REMOTE START INPUT SIGNAL PIN 2 = 0V DC INPUT

7 way Lumberg Code: 105.098
ALARM PINS 3 + 4 = VOLT FREE ALARM OUTPUT CONTACTS	REMOTE START VOLTAGE SIGNAL REQUIRED TO OPERATE PIN 1 = +12VDC/+24VDC REMOTE START INPUT SIGNAL PIN 2 = 0V DC INPUT PIN 5 + 6 = LINKED PIN 7 = NOT USED

9 way RS232 female Code: 105.106
ALARM NO ALARM OUTPUT	REMOTE START VOLTAGE SIGNAL REQUIRED TO OPERATE PIN 2 = 0V DC PIN 3 = +12VDC/+24VDC REMOTE START INPUT SIGNAL

9 way RS232 male Code: 105.107
ALARM PIN 3 = +12VDC/+24VDC ALARM OUTPUT	REMOTE START VOLTAGE SIGNAL REQUIRED TO OPERATE PIN 1 = REMOTE START INPUT SIGNAL PIN 9 = 0V DC

9 way RS232 male Code: 105.104
ALARM PINS 1 + 2 = VOLT FREE ALARM OUTPUT CONTACTS	REMOTE START VOLT FREE CONTACTS REQUIRED TO OPERATE PIN 3 = REMOTE START INPUT SIGNAL PIN 4 = +12V DC

No Connector Code: 105.108
ALARM Red and blue wires = alarm signal Output via a set of volt free contacts inside Purex extractor	REMOTE START Yellow and green wires = remote start stop Volt free contacts required to close these wires to start (+12VDC signal)

Remote ON/OFF Switch Code: 105.114
Now you can easily switch your Purex fume extractor on or off from up to 5m away. This is particulary useful if your fume extractor is tucked away under a bench or in a cupboard where it cannot easily be accessed. This feature is also useful if the work you do is not continuous e.g. intermittent hand soldering as you will be saving energy by turning the extractor off.

All cables are supplied in 5m length.